Table of Contents
Trimix Flooring – Process, Specification, Rate & Complete Guide Complete guide on Trimix Flooring – process, specification PDF, Tremix procedure, labour & material rate, concrete ratio & section detail explained.
When it comes to industrial floors, warehouses, parking areas or even heavy traffic zones, Trimix Flooring has become the most popular choice. This flooring method not only gives high strength but also ensures a dust-free and smooth surface. In this article, we will cover Trimix flooring process step by step, specifications, PDF references, rates with material and labour, concrete ratio and even section detail.
What is Trimix Flooring?
Trimix flooring is a vacuum dewatered flooring system used to increase the strength, durability and abrasion resistance of concrete floors. By using a vacuum pump, excess water is removed from freshly placed concrete, which reduces porosity and shrinkage. This flooring is widely used in factories, workshops, parking lots, roads, godowns and basements.
Trimix Flooring Process Step by Step
The Trimix flooring process involves the following steps:
- Surface Preparation – Clean and level the surface properly.
- Formwork & Level Marking – Set proper level points with levelling instrument.
- Concrete Pouring – Pour concrete of required grade (generally M20 to M25).
- Vacuum Dewatering – Use vacuum pump to remove excess water.
- Power Floater/ Trowelling – Floating and trowelling gives smooth and dense finish.
- Surface Hardener Application – Apply dry shake floor hardener for extra wear resistance.
- Final Trowelling – Done using ride-on or walk-behind trowel machine.
- Curing – Proper curing for atleast 7 days to achive strength.
👉 For more details, you can also check a Trimix flooring process PDF available online for reference.
Trimix Flooring Specification PDF
Every flooring project requires proper specification to maintain quality. A standard Trimix flooring specification PDF generally includes:
- Concrete grade: M20 or higher
- Slab thickness: 100mm to 300mm (depending on load)
- Surface hardener: Metallic or non-metallic dry shake hardener
- Vacuum dewatering: Mandatory for reducing water cement ratio
- Curing: At least 7–14 days
Tremix Flooring Procedure PDF
Many engineers and contractors prefer to keep a Tremix flooring procedure PDF on site for easy guidelines. This includes step-by-step method statements, machinery list, safety measures and curing techniques. If you are a student or site engineer, downloading this PDF can help in preparing DPR (Daily progress reports) or project documentation.
Trimix Flooring Rate with Material
The Trimix flooring rate with material depends on:
- Concrete grade (M20/M25)
- Thickness of slab (100mm/150mm/200mm)
- Location of project
- Surface hardener requirement
👉 On average, the Trimix flooring rate with material in India ranges between ₹85 to ₹120 per sq.ft depending on specification and site condition.
Trimix Flooring Labour Rate
If only labour is considered, then the Trimix flooring labour rate is around ₹25 to ₹40 per sq.ft. This rate varies based on city, contractor experience and the type of machines used (ride-on vs walk-behind).
Trimix Concrete Ratio
The most commonly used Trimix concrete ratio is:
- Cement : Sand : Aggregate = 1:1.5:3 (for M20 grade)
- Water cement ratio: 0.40–0.45 (lowered due to vacuum dewatering)
This mix ensures durability, high strength and resistance against wear & tear.
Trimix Flooring Section Detail
In drawing and execution, Trimix flooring section detail is very important. A typical section detail consists of:
- Subgrade – Compacted soil
- Sub-base – 100mm thick PCC or WMM layer
- Reinforcement – Welded wire mesh or steel rods (depending on load)
- Concrete Slab – Trimix concrete 100–300mm
- Surface Finish – Power trowelled with floor hardener
This section ensures proper load transfer and long-lasting durability.
Conclusion
Trimix Flooring is an excellent solution for industrial and commercial flooring needs. With proper specification, correct concrete ratio, skilled labour and machinery, this flooring can last for decades with minimal maintanance. Whether you are a student searching for Trimix flooring process PDF or a contractor looking for Trimix flooring rate with material, this guide will surely help you.
If you need ready-to-use documents like Trimix flooring specification PDF or Tremix flooring procedure PDF, feel free to search in civil engineering resource websites or contact contractors who provide such services.
What is the Trimix Flooring process step by step?
The process includes: surface preparation → concrete pouring → vacuum dewatering → power trowelling → surface hardener application → final trowelling → curing.
What is the Trimix Flooring rate with material?
The average Trimix flooring rate with material is around ₹85 to ₹120 per sq.ft in India, based on slab thickness and specifications.
What are the benefits of Trimix Flooring?
High strength
Dust-free and durable surface
Resistance to abrasion
Lower shrinkage and cracks
Long service life
Hi! I’m Sandip, a civil engineer who loves sharing about Civil Engineering & new ideas and tips. My blog helps you learn about engineering in a fun and easy way!